Xfly-Model X2100 2.1M FPV Plane PNP Version

Derived from XFly Swift 2100 glider, X2100 is an FPV carrier aircraft designed by XFly Model team specially for FPV hobbyists. The X2100 adopts a glider layout design with a high aspect ratio, which has natural advantages in flight time and flight stability. Twin power systems allow it to easily achieve 1:1 thrust-to-weight ratio, and the large wingspan design of the aircraft provides ample space for future payload additions. Capacious battery compartment allows for common 4s Lipo batteries or 21700 batteries for optimized flight times. 

All components of the X2100 can be assembled without glue and fixed with screws, featuring a safe and reliable design. A gimbal installation position is reserved on the nose section of the aircraft for a standard two-axis gimbal, or it can be modified by yourself. Twin powers distributed on each side, plus the reasonable match of axle distance and propeller, free you from the risk of propeller damage while landing.

- The layout design of the glider has natural advantages in flight time and flight stability.
- Twin power systems and the large wingspan design providing ample space for future payload additions.
- Capacious battery compartment allowing for common 4S LiPo batteries or 21700 batteries for optimized flight times.
- All components can be assembled without glue and fixed with screws, featuring a safe and reliable design.
- A gimbal installation position is reserved on the nose section of the aircraft for a standard two-axis gimbal, or it can be modified by yourself".

- Material: Durable EPO Foam

- Wing Span: 2100mm (82.7in)

- Length: 1050mm (41.3in)

- Flying Weight: Around 1500g 

- Servo: 9g Digital Servo x 6 (Installed)

- Motor: 2212 1400Kv Outrunner Brushless Motor x 2 (Installed)

- ESC: 40A Brushless ESC x 2 (Installed)

- Propeller: 8 x 5  2 Blade Propeller x 2 (Include)

- Battery: Li-Po 4s 14.8v 2600mAh - 3300mAh / 21700-4S1P-5000mAh (21700-4S2P-10000mAh) (Not Include)

- Radio: 4 - 6 Ch Radio Control (Not Include)

Write a review