JP Hobby ER-200 Bicycle Electric Retract System Control Box V1 - High Voltage

V1 version of the retract system with simple doors closed system seamlessly into an organic whole. The accuracy of this system is very high and very easy to operate.
The system will automatically activate the door system after 2 sets of retracts connected on the controller(The system will not able to activate the door system If one of two retract unconnected on the controller.The system automatically identify to abandon the use of port mode at that condition,but other retracts are not effect).

- Suitable for JP Hobby ER-200 electric retracts landing gear.

- Can be used for JP Hobby bicycles electric retract landing gears system.

- Working Voltage:  7.4V - 8.4V ( 2s )

​- Control Box Sizes: 53mm X 32mm X 10mm

​- Control Box Version: V1

​- Weight: 24g 

Remark:

V1: Opened gear doors when the landing gear is out        
V2: Closed gear doors when the landing gear is out

WARNING: Servos which controlling the gear doors must imperatively be H.V. (High Voltage) type .

Write a review